產品規格書/Specification
|
產品/product: |
銀鉑漿料/ Ag Pt paste (Pt10%) |
|
料號/Part number: |
03H-1810 |
適用范圍/Application:
此產品適用于厚膜電路、傳感器。
Suitable for thick film circuit, sensor electrode.
使用條件/Operating conditions：
|
基材 Substrate |
氧化鋁陶瓷 Alumina ceramic |
|
印刷 Printing |
200-300目絲網印刷 200-300 mesh stainless screen |
|
流平 Levelling |
5-15min minutes at room temperature 室溫下流平5-15分鐘（時間根據流平的實際情況決定）。 |
|
干燥&燒結 Drying &Sintering |
通風烘箱烘烤100-150℃，10-15分鐘 100-150℃ 10-15 min 隧道爐空氣氣氛下燒結，峰值850℃（推薦值），10分鐘。 Atmospheric firing in belt furnace with peak time of 10 mins at 850℃ |
|
Thinner |
ST-1000 |
性能/Characteristics：
1. 漿料性能/Paste Characteristics：
|
性能Characteristic |
標準Standard |
測試方法及條件 Test method and conditions |
|
|
1 |
Fineness |
≤5μm |
FOG test |
|
2 |
Viscosity |
130-280Pa.s |
Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃，
Brookfield HBT（博利飛）粘度計， 轉子SC4-14/6R), 10rpm, 25±1℃ 粘度可根據用戶實際需要調節。 |
2. 燒結后特性/Characteristics after firing：
在1燒結條件下，膜厚8-12mm Check fired film produced under the conditions specified in 1）, (Film thickness is 8-12mm.)
|
特性 Characteristics |
Standard 標準 |
測試方法和條件 Test method and conditions |
|
|
3 |
Resistivity 方阻 |
≤15mΩ/□ |
Test pattern 0.6mm×60mm 測試圖形0.6mm×60mm |
|
4 |
Adhesion strength 附著力 |
|
Peel Test: 0.5mmφ Tin plated Cu wire soldered on 2mm×2mm Pad. 0.5mmφ錫浸銅線，焊接面積2mm×2mm Solder: 96.5Sn/0.5Cu Mildly activated flux used. 焊料：96.5Sn/0.5Cu |
|
Initial 初始附著力 |
≥46.5N |
||
|
Ageing 老化附著力 |
≥26.7N |
Ageing: 150℃×24hrs 老化條件：150℃，24小時 |
|
保存條件，有效期/Storage condition and Term of validity
產品應在5-25℃的環境溫度下密封儲存，有效期為產品發貨之日起1年。
The product shall be guaranteed for 1 year after shipping date, keep tightly under at 5-25℃
包裝方式/Packaging method：
標準包裝，1000g/罐, 樣品可提供200克小罐包裝
Standard package 1000g/can，if you need sample to test, available 200g with small package.
