產品規格書/Specification
|
產品/product: |
導電銀漿/ Silver paste |
|
料號/Part number: |
01L-2211 |
適用范圍/Application:
單組分導體漿料系列，可廣泛應用于薄膜開關、柔性印刷電路、筆記本鍵盤電路、手機鍵盤屏蔽線路、多層線路印刷、射頻干擾屏蔽、RFID、玩具、學習機電路印刷和觸點印刷等領域，在氧化鋁陶瓷、微晶玻璃陶瓷、PET、PC等片材上均可使用，可提供優良的導電性和薄膜粘接性，有著良好的印刷性、抗氧化性、柔性和極強的附著力，其導電性能不會因為印刷后的加工成型或產品使用時的彎曲變化發生大的偏移，絲網印刷、噴涂均可。
01L-2200 series, single group slurry , widely used in thin film switch, flexible printed circuit, laptop keyboard circuit, phone shielding keyboard circuit, multilayer printed circuit, RF interference shielding, RFID, toys, learning machine printed circuit and contact printing and other fields, in the alumina ceramic, microcrystalline glass ceramics, pet, PC, and other sheet can be used, can provide excellent electrical conductivity or adhesive film, has a good printing, oxidation resistance, flexible and strong adhesion, the conductive performance is not because of the occurrence of large offset printing process or product using the bending changes, screen printing, spray can.
使用條件/Operating conditions：
|
基材 Substrate |
陶瓷基板、PET、聚酯薄膜等片材 Suitable for Ceramic, Pet, PI etc |
|
使用方法 Method of use |
200-250 mesh stainless screen 200-250目絲網印刷 |
|
流平 Levelling |
3-5min minutes at room temperature 室溫下流平3-5分鐘（時間根據流平的實際情況決定） |
|
固化 Curing conditions |
在恒溫烘箱80-120℃，8-30min 80-120℃，10-30 mins (For reference, the baking temperature and baking time can be set according to actual needs) (僅供參考，具體烘烤溫度和烘烤時間可根據實際需要設定) |
|
稀釋劑 Thinner |
ST-1001 |
性能/Characteristics：
1. 漿料性能/Paste Characteristics：
|
性能Characteristic |
標準Standard |
測試方法及條件 Test method and conditions |
|
|
1 |
Fineness 細度 |
≤15μm |
FOG test |
|
2 |
Viscosity 粘度 |
80-220Pa.s |
Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃， Brookfield HBT（博利飛）粘度計， 轉子SC4-14/6R), 10rpm, 25±1℃ 粘度可根據用戶實際需要調節。 |
|
3 |
固體含量 content |
70% |
銀 Silver，Glue |
2. 燒結后特性/Characteristics after curing：
在1燒結條件下，Check fired film produced under the conditions specified in 1）,
|
特性 Characteristics |
Standard 標準 |
測試方法和條件 Test method and conditions |
|
|
4 |
Resistivity 方阻 |
≤30mΩ/□ |
固化膜厚8-20μm，測試圖形100mm*1mm Cured film thickness 10-25μm, test pattern 100mm * 1mm |
|
5 |
硬度 Hardness |
2H |
鉛筆硬度 Pencil hardness |
|
6 |
附著力 Adhesion |
無脫落 Not fall off |
3M 600#膠帶90°拉 3M 600#Tape 90°Pull |
保存條件，有效期/Storage condition and Term of validity
產品應在5-15℃的環境溫度下密封儲存，有效期為產品發貨之日起六個月。
The product shall be guaranteed for 6 months after shipping date, keep tightly under at 5-15℃
包裝方式/Packaging method：
標準包裝，1000g/罐, 樣品可提供200克小罐包裝
Standard package 1000g/can，if you need sample to test, available 200g with small package.
