適用范圍/Application:
適用于高溫厚膜電路、LTCC 陶瓷，疊層元件填孔導通電極使用
Suitable for high-temperature thick film circuits, LTCC ceramics, and laminated component via filling and conductive electrodes.
使用條件/Operating conditions：
|
基材 Substrate |
氧化鋁陶瓷，LTCC 陶瓷，疊層元件 Alumina ceramic |
|
印刷 Printing |
200-300 目絲網印刷 200-300 mesh stainless screen |
|
干燥&燒結 Drying &Sintering |
1 單層印刷（氧化鋁板） Single layer printing(Alumina ceramic) 通風烘箱烘烤 100-150℃ , 10-15 分鐘 100-150℃ 10-15 min 空氣下燒結，峰值 850℃（最低推薦值），2-10 小時。 (可根據實際需要調高燒結溫度 850~1400℃) Sintering in air with a peak temperature of 850°C (minimum recommended value) for 2 to 10 hours. (The sintering temperature can be adjusted upward according to actual needs from 850°C to 1400°C.) |
|
② 多層印刷 Multilayer printing 200-500℃溫度間排膠，最少 60 分鐘 Binder removing, 200-500℃ , 60 mins at least 空氣下燒結，峰值 850℃（最低推薦值），2-10 小時。 (可根據實際需要調高燒結溫度 850~1400℃) Sintering in air with a peak temperature of 850°C (minimum recommended value) for 2 to 10 hours. (The sintering temperature can be adjusted upward according to actual needs from 850°C to 1400°C.) |
|
|
Thinner |
ST-1000 |
性能/Characteristics：
1. 漿料性能/Paste Characteristics：
|
性能 Characteristic |
標準 Standard |
測試方法及條件 Test method and conditions |
|
|
1 |
Fineness |
≤5μm |
FOG test |
|
2 |
Viscosity |
280-530Pa.s |
Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃ , Brookfield HBT（博利飛）粘度計， 轉子 SC4-14/6R), 10rpm, 25±1℃ 粘度可根據用戶實際需要調節。 |
2. 燒結后特性/Characteristics after firing：
在 1 燒結條件下，膜厚 8-12μm Check fired film produced under the conditions specified in 1 ）, (Film thickness is 8-12μm.)
|
特性 Characteristics |
Standard 標準 |
測試方法和條件 Test method and conditions |
|
|
3 |
Resistivity 方阻 |
≤80mΩ/ □ |
Testpattern 0.6mm×60mm 測試圖形 0.6mm×60mm |
|
4 |
Adhesion strength 附著力 |
|
Peel Test: 0.5mmφ Tin plated Cu wire soldered on 2mm×2mm Pad. 0.5mmφ錫浸銅線，焊接面積 2mm×2mm Solder: 96.5Sn/0.5Cu Mildly activated flux used. 焊料：96.5Sn/0.5Cu |
|
|
Initial 初始附著力 |
≥33.2N |
|
保存條件，有效期/Storage condition and Term of validity
產品應在 5-25℃的環境溫度下密封儲存，有效期為產品發貨之日起 1 年。
The product shall be guaranteed for 1 year after shipping date, keep tightly under at 5-25℃
包裝方式/Packaging method：
標準包裝，1000g/罐, 樣品可提供 200 克小罐包裝
Standard package 1000g/can ，if you need sample to test, available 200g with small package.
